Språket som det ska översättas till: Engelska
Turn 3 full rotations to the left.
Enter the desired value in the electronics and press the start button.
The mobile aggregate should stop approximately 10-15mm before the set desired value.
Press the stop button.
If the difference to the desired value is less than 10mm, turn ... to the left.
If the difference to the desired value is more than 15mm, turn ... to the right.
Repeat step 2 and 3 until the difference is approximately 10-15mm.
Turn ... to the right until the mobile aggregate drives to the set desired value.
Favoritöversättningar
